shop_olympia nera

OLYMPIA 3d Printer

€4,900.00 + VAT

OLYMPIA 3d Printer – delivered in 30/40 days

  • Delta Technology FFF
  • Display Touch 2,8″
  • File Transfer via USB Port/WiFi
  • Connectivity WiFi
  • Nuzzle 1.75 filament / out put 0.40mm
  • Bowden Extruder
  • Print Volume h 600mm / d 400mm
  • Resolution 50 to 300 micron
  • Printing Speed 200 mm/s
  • Traveling Speed 300 mm/s
  • Glass Plate 4mm adjustable
  • Self-lubricating Rails Axis Movement

30 in stock

SKU: PRT-OLY-01. Category: . Tags: , , .

Product Description

OLYMPIA 3d Printer is a 3d printer with delta technology, which differs from our ERA 3d Printer in size and design. OLYMPIA  has a print capacity of 40 cm x 60 cm, useful for prototypes, mock-ups and models. The company decided not overloading the printer figure, given the size, and maintain a clean and clear design.

The 3d printers are potentially very dangerous as it involves electricity and high temperatures, please read all of the manual to enable you to make an informed decision. Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn’t ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn’t be taken lightly. High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation. We wouldn’t recommend leaving your printer running un attended, or at least until you are confident to do so. We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the OLYMPIA 3D Printer.

Start typing and press Enter to search

support PLA_Filamentshop_ely