shop-ewe-starter

Essential

€590.00 + VAT

Ewe filament estruder completely assembled and tested – w/o white case – delivered in 30/40 days

  • 1x Motor
  • 1x Plasticizing screw
  • 1x Structure (which includes an aluminum base, extrusion barrel divided into a main body made of steel and a brass terminal)
  • 1x RTD (Resistance Temperature Detector)
  • 1x Electronic set ( which includes logical extrusion control, cooling fan, power supply)
  • 1x Hopper
  • All nuts, bolts, and screws
  • ALREADY ASSEMBLED AND TESTED
Clear selection
SKU: EXT-ASB-01. Category: . Tags: , .

Product Description

EWE Filament Estruder is potentially very dangerous as it involves electricity and high temperatures, please read all of the manual to enable you to make an informed decision. Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the estruder runs on 12V supplied by a certified power supply, so you shouldn’t ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn’t be taken lightly. High temperatures are involved with estruder, the extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the estruder during operation. We wouldn’t recommend leaving your estruder running un attended, or at least until you are confident to do so. We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the EWE Filament Estruder.

Start typing and press Enter to search

support full kitewe-designupgrade